BUSKERs CUSTOM VTG DRUM SET 14" Bass! PEARL BROADWAY TOLEDO Great Sound&Sparkle!

Description

An ORIGINAL music industry collectible offered from
InTimeWithMusic
Approximate Age*: [Drums are 1960's or 1970's. All retrofitted parts are vintage prior to 1999]
"FRANKENSTEINED" ONE OF A KIND PUMPKIN ORANGE SPARKLE TRAVEL SIZE DRUM SET! THE ONLY ONE IN
EXISTENCE
!
Brands Include: Broadway by John Grey and Sons (England), Pearl, Ludwig, "Unbranded Japanese***LISTING UPDATE***" SEE BELOW.
BUSK, Gig, rehearse or add a 13"deep x 14" Bass drum to your existing set. Smart Car drivers..or even trailer it behind your bike!
It's one of a kind I professionally modified in my drum and guitar center about  25 years ago...
At that time I was doing repairs for 100's of high schools. Their drum sets were usually sets from the 60's with tom holders and bass spurs that were falling apart. This set was made to display the top replacement systems available to me from Pearl.  I was retrofitting them constantly.
Both the orange outer finish and silver inner finishes on all 3 drums are the original finishes.
They are all a bit different if you look at them carefully.
I had these 3 drums sitting around in my drum center
. It was a coincidence they were all orange sparkle so I made this one of a kind drum set. What I didn't expect was how well it plays. All of the drum heads are in very good condition.
All three drums have been modified to fit Pearl spurs, tom brackets, a bass drum receiving bracket and the 3 piece tension lugs on the bass drum. There are 6 Ludwig claws on the resonator side and 6 Japanese claws on the batter. I used a regular Camco bass pedal which is not included however I AM including the customized pedal beater which should be all you need. It's a vintage USA Camco beater that has been shortened, shaved on one side (to prevent rotation) and has added weight in the form of a hi hat clutch part to compensate for the shorter throw.
The snare and bass drum have no branding. They are Japanese probably from the sixties or early seventies.
**LISTING UPDATE**SEE BELOW.
The bass drum was originally a parade snare drum. I switched out the metal hoops with wooden hoops. Not sure where I got them. Probably a marching drum. One of the hoops has the cutouts for a snare bed. the finish on it is perfect except for some spots underneath.
"Top of the line at the time" Pearl parts! Due to their shape to fit the spurs are mounted upside down.  The bass drum mount cymbal stand has a vintage knurled Ludwig L arm at the bottom and a possibly Gibraltar or Westbury top. There's an added mount on the other side of the bass for a "lefty" or to add an accessory.
***UPDATE**" In my notes about the unbranded Japanese drums I had thought possibly Coronet or Baxter. I sent the listing to a friend and got
this comment back.
"That snare drum on your Frankin set, [I call it "The Frankenstein"]  is identical to my Toledo that came from Sears, Identical snare strainer, Identical tension rods, tension lugs, and counterhoops. The cymbal mount you placed on the bass drum left hand side, is also identical to my Toledo.
I hope the Frankin set finds a good home!"
His remarks have made me think that possibly the 14" bass drum wasn't a marching snare but the floor tom from a Toledo set. That would explain that the shell cymbal mount brackets may actually be two Toledo floor tom leg brackets. This explains the 2 filler bolts in the bottom of the bass drum shell which may have replaced the 3rd floor tom leg bracket.
INCLUDED WITH THIS DRUMSET: (All items are
one of each
unless otherwise specified;
13" x 14" Bass Drum - Condition:
[VERY GOOD There's a few dark spots in the finish on the underside, ] It t
a
kes a regular 14" drum head. The heads installed are Remo clear Emperor on the batter with a Kevlar impact pad for definition and a Pearl World Series front head with a built in dampening ring. If you want a studio sound add one layer of 14" wide precut carpet underlay on the inside bottom extending from spur to spur.
5 1/2" x 10" John Grey "Broadway" Rack Tom
- Condition:
[VERY GOOD] One of the best I've seen for the vintage. 5 SLOT tension lugs. There's a slight de-lamination in the bottom edge (see photo) which has no bearing (no pun intended) on sound. The head of choice is a clear Emperor. Sounds very punchy. Just the right amount of sustain.
5" x 14" Wood Snare Drum
- Condition:
[EXCELLENT] The batter sports a Remo Ambassador in great shape.  The resonator of choice is a Diplomat also in excellent condition. The internal muffler and strainer mechanisms are miraculously original and working as "bad as new".. Those who have experience with these parts know why the Ludwig P85 did so well. That said leave the muffler off and the strainer on.  Never mess with an old Japanese snare mechanism once you get a sound you like. If you do you will strip it. It's rare to find one that hasn't been swapped out. One of the snare strands is missing but the burr has been removed. See photo.
Bass Drum mount Cymbal Holder
- Condition:
[EXCELLENT] The bottom L rod is a vintage knurled Ludwig. The rest is Gibraltar or Westbury and new circa 1996. There's a bracket on both sides of the bass.
Two Pearl SP30 Bass Drum Spurs (Mounted Upside down)
- Condition:
[EXCELLENT] Amazing spurs! One of the Wing bolts has been swapped out for a key bolt. See photo. Same functionality. Once you set it you forget it so no big deal or you could replace the wing bolt.
Two Pearl TH 98S Tom Arms
- Condition:
[NEAR MINT] These are the SHORT arms and at maximum height in the photos. If you want more height you could extend them or buy the longer versions.  As stated above this set was built for a display. I used it a couple times to jam with my mother on her organ and piano which was very cool.
TWO Pearl BT2  Tom Mounting Brackets (Mounted)
- Condition:
[NEAR MINT]
One Pearl BB2 Bass Drum receiving bracket (Mounted) Condition:
[NEAR MINT]
Two SX 2 Stop Locks
Condition:
[NEAR MINT]
Six HL14T 3 Piece Hi Tension Lugs Assemblies (Mounted)
Condition:
[NEAR MINT]
Accessories: One Vintage 1980's USA Camco Customized Bass drum beater.
- Condition:
[VERY GOOD] this beater has been shortened and not useful for a regular size bass drum. It will fit most pedals that have a low profile. It was used in a USA 80's Camco. It has been modified with weight to compensate for the short throw required for a 14" bass drum. As an option you can elevate the bass drum and use a regular beater but this is a lot more fun!
SHIPMENT INFORMATION
Due to the weight and size we can ship this drum set to the continental US and Canada only.
The rack tom will be packaged
separately
and inserted into the bass drum. Approximate Total Weight = 34 lbs.
Can be shipped in a single box via
Canada Post Expedited Parcel on boxes up to 66lbs with size restrictions. (Includes Insurance and signature on delivery)
We also offer;
-UPS
(Includes Insurance and signature on delivery) Please message us through eBay messaging with your postal or zip code so a rate can be calculated.
-FREE Local Pickup. Message me before purchase.
______________________________
The item in these photos is the exact item you will receive.
This item has been stored in a smoke and pet free environment.
First time ever offered for sale. NOT from a thrift store, a replica, knock off, or a second.
InTimeWithMusic
items are guaranteed to be authentic and original memorabilia
coming to you by way of a music industry production team member, a promotions rep associated with the production of the related event or a former music center owner. (Excluding our Non-music items).
Please view all photos and read all of the description, payment & shipping information prior to purchasing.
Due to photography lighting actual colors may vary. Stands, magnets or props used during photography are not included.
*Publication dates and/or product manufacturing dates may differ. Dates mentioned in our listings are to the best of our knowledge and not guaranteed.
______________________________
SAVE ON SHIPPING!
If you purchase more than one item we can combine them into a
single shipment to save you money!
The shipping cost is approximately the same for 1 as it is for
up to 3 magazines* !
up to 200 pages of literature* !
up to 2 shirts* !
up to 6 hats* !
With one extra simple step we can ensure you pay the lowest shipping cost
before you pay
. This is how..
1.
Before
paying for your items check the "Request Invoice From Seller" box. Do not pay. Instead wait until you receive our invoice.
2. We will receive your request and weigh your items & packaging combined.
3. Then we will return a completed invoice to you with the best possible shipping discount. When you get that back you then pay for your items and clear check out.
Note: All items must be sent to the same address.
___________________________________________
Be sure to check out our store for Brochures, Magazines, Catalogs, Print-Ads, Music Books, Cymbals, Guitars, Guitar Parts, Cases, Memorabilia, Backstage Passes, Ticket Stubs, Stage Items, Drums, Drum Parts, Stands, T-Shirts, Sheet Music, Picks, Concert Programs, Posters, Amps, Electronics, Drum Sticks, Sound Effects, Cassettes, Photos, Autographs, Percussion, Keyboards, Signs, Banners, Displays, Vinyl Records, Ball Caps, Hats, Tour Riders, Whistles, Mikes, Orchestral Instruments, Jackets, VHS Tapes, Ephemera, Clothing & miscellaneous non-musical but still cool stuff in our
Beyond Music
department.
___________________________________________
Professional Shipping:
Most individual publications are shipped in a magazine collector's bag with an acid free backer packed inside a
RAM BOARD
fortified bubble air jacket.  (Larger quantities are shipped in a box for extreme protection).
INTERNATIONAL BUYERS PLEASE NOTE
: Import duties, taxes and charges imposed by destination countries are the responsibility of the buyer and not included in the item price or shipping cost. Please check with your country's customs office to determine import costs (if any) prior to bidding or buying as payment may be due on delivery.
The Ebay estimated delivery date doesn't account for occasional delays in customs, labor disputes or courier limitations.
RETURN POLICY:
This item is non returnable:
About
InTimeWithMusic!
My music industry professional roles include stage technician, repair technician, instrument builder, stage manager, TV producer, music store owner, music teacher and professional musician. I began servicing musical instruments professionally in 1969 assembling and repairing them for music stores. Since then I've worked with many of the world's greatest musical icons and instrument manufacturers.
Please visit my Ebay store
https://www.ebay.ca/str/InTimeWithMusic
and the intimewithmusic website for back stories, provenance, info and photos of hundreds of iconic artists, manufacturers and the charities that I'm pleased to have worked with.
Thank you!  I'm always happy to answer your questions about my listings!